1. How can I configure a USB attached printer in an RDP sessions to a Windows server?


2. Are there any limits on the types of printers my CE thin client can support? 


3. How do I configure a remote OUTQ on the AS/400 (iSeries) so I can print to my attached printer via IP?  


4. Where can I find a CE Thin Client Manual? 


5. Where can I find a CE Tablet Manual? 


6. How do I restore a unit that has an OS prior to CE 5.0 Pro to factory defaults? 


7. I configured a 5250 printer and 5250 display session. Display session comes up and the II is in blue so it is active but if you click on it nothing happens. You can select CTRL ALT DOWN and move to it and then select I to get back to the display session but then once again I cannot select the printer. 


8. I cannot get any USB printers, keyboards or mice to work on my U700 or G700 CE thin client? 


9. How do I go between multiple RDP sessions when in WBT mode?  


10. Where can I find instructions for mounting bracket installation?  


11. Is the Bluetooth profile on the CE Tablets HID or SPP? 


12. I have a WTC-1000 model G700 and none of the USB ports work, including USB keyboard and mouse. 


13. How can I put a custom wallpaper on my CE WTC-1000 thin client? 

In order to do printing to a Thin Client printer via Windows or RDP, the LTC needs a static IP address and then add a printer in windows and make it local and create a a Standard TCP/IP port pointing at the IP address of the LTC. Then share the printer on the Terminal services server and use it in the RDP session. This is necessary because the LTC does not tell windows what type printer it has connected to it so Windows cannot determine which driver to use you have to tell it. This should then allow you to print to the USB printer from RDP.

Back To Top

The CE units do not support printers that use the LIDIL printer language.

Back To Top

CRTOUTQ OUTQ(MYOUTQ) +

RMTSYS(¨*INTNETADR) +

RMTPRTQ('usb') +

CNNTYPE(*IP) +

TRANSFORM(*YES) +

MFRTYPMDL(*NECP2) +

WSCST(QGPL/NECP2) +

INTNETADR(10.1.1.63) ====> IP of the network

Then issue the STRRMTWTR OUTQ(MYOUTQ)

Back To Top

CE Manual.pdf

Back To Top

360CE.pdf

310CE.pdf

Back To Top

To restore the registry of a unit that has an OS prior to CE 5.0 Pro to factory default, you have to delete or edit the registry file saved on the DOM.

There are three options:

1. - turn on the unit and during first stage of boot (Bos splash bitmap with progress bar) press Ctrl+C to exit the boot program and go to the DOS prompt. The text color is black so you cannot see what you are typing.

- type cd docume~1

- type echo a > system.hv

- reboot the terminal



2. - boot the device from an USB device with DOS

- type d: or c: to point the DOM (with a bios version the DOM drive letter is "d:" with other bios the DOM is "c:")

- type cd docume~1

- type echo a > system.hv

- reboot the terminal



3. - ftp to unit's IP

- sign in with admin admin

- type bin <enter>

- get defpar <enter>

- reboot it is back to factory defaults.

Back To Top

The program was designed to perform this way in TBT/WBT mode. To view it normally you must run in Desktop mode.

Back To Top

If this happens you will need to change a parameter in the U700 or G700 BIOS in order for the WINCE to work with USB Keyboard, mouse and printer. In the BIOS, (DEL key on boot) go into "Integrated Peripheral" and then change the "USB Operation Mode" to Full/LOW Speed. **NOTE** If this happens we apologize as it should have been changed prior to shipping.

Back To Top

Make sure the Keyboard option in Local Resource is set to On the Local Computer. You will find it in the Control Panel under RDP Global Settings under the Local Resource Tab and in the session connection itself. Once this is set use CTRL + ALT + up or down arrow key. See images below:

Back To Top

Mounting Bracket Guide

Back To Top

It depends on the peripheral:

When pairing with a Bluetooth mouse or keyboard it uses HID.

When pairing with a Bluetooth printer it uses SPP.

Back To Top